Removing the wheel parts:
1. Insert the wrench into the space near the axle of the wheel. Turn counterclockwise.

 

2. Remove the female axle, the male screw, and the spacers, and set them aside. You will need these parts to put on the new wheel. Discard the old wheel and if you are replacing the bearings too, you can discard the bearings as well.

 

Installing the new wheel:
1. Insert the female axle through the safety plate and metal structure, then through the spacer followed by the wheel, the second spacer, and the remaining parts of the wheel structure. (See Diagram). Insert the male screw and tighten with allen wrench.

Please check all hardware on regular basis, if there are any loose bolts or parts tighten them immediately. If a part is broken contact info@streetsurfing.com, so that we may help you in getting it replaced and back onto your board.